How do I make a river table epoxy resin in India?

To make a river table with epoxy resin in India: (1) Prepare and seal live edge wood slabs; (2) Build a mould around the gap; (3) Mix Bondone Clear Cast 3:1 by weight (resin:hardener); (4) Add pigments like blue or teal to create the river effect; (5) Pour slowly and use a heat gun to remove bubbles; (6) Allow 24 hours for full cure at room temperature; (7) Sand from 400 to 2000 grit and polish to a glass finish. Si Epoxy Adhesives supplies Bondone Clear Cast pan India.

How much epoxy resin do I need for a table top in India?

For a standard table top in India, a 3mm coating layer on a 4×2 ft table needs approximately 1.2–1.5kg of mixed epoxy resin. For a river table with a 25mm deep channel, a 4×2 ft table would need roughly 6–10kg depending on the channel width. Si Epoxy Adhesives offers both 1.2kg small sets (₹710) and 12kg large sets (₹6,400) of Bondone Clear Cast.

Is epoxy resin table top safe for indoor use in India?

Yes, fully cured Bondone Clear Cast epoxy resin is safe for indoor use in India. Once cured (24 hours at room temperature), the surface is chemically inert, odourless, and food-safe for indirect contact. During application, ensure adequate ventilation and use gloves and safety glasses. The product is BPA-free and manufactured by Hindusthan Speciality Chemicals Limited in India.

What is the difference between Bondone Clear Cast and UV stable epoxy for table tops?

Bondone Clear Cast offers APHA<30 crystal clarity and is ideal for indoor table tops, river tables and resin art where UV exposure is minimal. For outdoor table tops or areas with significant sunlight exposure, Bondone Clear Cast UV Stable is the recommended option — it includes UV inhibitors to resist yellowing over time. Both are available at Si Epoxy Adhesives.

Do you supply epoxy resin in bulk for B2B table top manufacturers in India?

Yes. Si Epoxy Adhesives supplies Bondone Clear Cast in bulk for B2B customers — furniture manufacturers, carpenters, interior designers, contractors and fabricators across India. Bulk pricing is available for 12kg sets and above. GST invoices issued. Contact via WhatsApp at +91-8595955752 for B2B pricing and bulk orders.

Bondone Clear Cast epoxy resin for table top and river table India — crystal clear casting resin

🪵

Bondone® Clear Cast — Table Top

Bondone® — DCM Shriram

In Stock

Table Top Epoxy River Table Coffee Table Deep Pour Live Edge B2B Bulk B2C Retail Crystal Clear Pan India

Bondone® by DCM Shriram · B2B Bulk & B2C Retail · Pan India Delivery

Epoxy Resin for
Table Top India

Name: Bondone Clear Cast Epoxy Resin for Table Top — 1.2kg
Brand: Bondone
SKU: BCC-1200
Price: 710 INR
Availability: InStock
Rating: 4.8 (94 reviews)

Bondone® Clear Cast — Two-Part Crystal Clear Casting & Table Top Resin

The best epoxy resin for table tops, river tables, live edge wood furniture, coffee tables and bar tops in India. APHA colour <30 (water-white), Shore D hardness 75–80, and an exceptional pot life of 300–370 minutes at 25°C. Trusted by furniture makers, carpenters, interior designers and DIY resin artists across India.

3:1 Mix Ratio

300+ Pot Life (min)

D75 Shore D

24hr Full Cure

Select Pack Size

Small Set — 1.2kg

900g Resin + 300g Hardener · Ideal for 1–2 table top coats or small river tables

₹710

Large Set — 12kg

9kg Resin + 3kg Hardener · For full river tables & bulk furniture production

₹6,400

💬 Order via WhatsApp

🚚 Same-day dispatch: Delhi · Noida · Gurgaon · Faridabad · Ghaziabad · Pan India 1–5 days · B2B GST invoice available

Technical Data Sheet

Product Specifications

⚗️

Physical Properties

Product Type	Two-component epoxy resin
Appearance	Water clear liquid
APHA Colour	< 30 (Ultra clear)
Mix Ratio	3:1 by weight (Resin:Hardener)
Viscosity — Resin at 25°C	800–1200 mPa.s
Viscosity — Hardener at 25°C	40–80 mPa.s
Specific Gravity (Mixed)	~1.10

💪

Mechanical Properties

Shore D Hardness	75–80
Surface Finish	High gloss, glass-like
Optical Clarity	Crystal clear / APHA <30
Yellowing Resistance	Moderate (indoor grade)
Chemical Resistance	Good (fully cured)
Heat Resistance	Up to 55–60°C (RT cure)
BPA Free	Yes

⏱️

Processing Data

Pot Life at 25°C	300–370 minutes
Full Cure — Room Temp	24 hours
Recommended Work Temp	20°C – 35°C
Max Humidity	Below 65% RH
Faster Cure Option	~40°C ambient
Mould Types	Hard mould or silicone rubber
TDS Reference	HSCL/TDS/06 v01

🌡️

Curing & Glass Transition Data

RT Cure (24 hrs) — Tg	55–60°C
Post Cure 50°C / 18 hrs — Tg	60–65°C
Post Cure 80°C / 3 hrs — Tg	70–75°C
Shelf Life (Resin)	12 months sealed
Shelf Life (Hardener)	12 months sealed
Storage Temperature	2°C – 40°C, cool dry place

📦

Pack Sizes & Applications

Small Set	900g Resin + 300g Hardener = 1.2kg total · ₹710 · Ideal for DIY, resin art, small table tops
Large Set	9kg Resin + 3kg Hardener = 12kg total · ₹6,400 · River tables, furniture production
B2B Bulk (Drum)	200kg HDPE drum — WhatsApp for B2B pricing & GST invoice
Primary Applications	Table tops, river tables, live edge wood tables, coffee tables, dining tables, bar tops, deep casting, resin art, coasters, jewellery, handicrafts, DIY crafts
Suitable Substrates	Wood, MDF, concrete, metal, glass, ceramics, silicone moulds
Customer Types	B2B: Furniture manufacturers, carpenters, interior designers, fabricators, contractors · B2C: DIY artists, hobbyists, resin art beginners, home users

Why Choose Bondone Clear Cast

Key Features

💎

APHA <30 — Water-White Clarity

Zero yellow tint on cure. APHA colour under 30 means the resin cures with true glass-like transparency — essential for river tables and luxury table top finishes.

⏳

300–370 Min Pot Life

India's longest working time in this category. Mix large batches, add pigments, position inclusions and pour wide river channels without rushing or wasting material.

🪨

Shore D 75–80 — Glass-Like Hardness

Extremely hard, durable surface once cured. Resistant to scratching, daily wear, mild heat up to 55°C and most household chemicals.

🌊

Deep Pour for River Tables

Low exotherm and low viscosity allow thick single pours into river channels without cracking or excessive heat generation — critical for wide river table projects.

🎨

Pigment & Inclusion Compatible

Works with epoxy pigment pastes, alcohol inks, mica powders, dried flowers, wood shavings, glitter and metallic powders for stunning decorative effects.

🏭

Made in India — Authorised Distributor

Manufactured by Hindusthan Speciality Chemicals Ltd (DCM Shriram group). Si Epoxy Adhesives is the authorised distributor in Delhi NCR — genuine product, GST invoice, B2B support.

Feature	Clear Cast (Standard)	Clear Cast UV Stable	ClearLam CC
Best For	River tables, indoor table tops	Outdoor / sunlight exposure	Thin lamination coating
APHA Clarity	< 30 (Water Clear)	< 30	< 30
UV Resistance	Moderate	High (UV inhibitor)	Moderate
Pot Life	300–370 min	60–90 min	30–45 min
Pour Depth	Deep (river table capable)	Shallow to medium	Very shallow (lamination)
Shore D Hardness	75–80	75–80	80–85
Start Price	₹710 / 1.2kg	₹850 / 1.2kg	Available on request
In Stock	✓ Yes	✓ Yes	✓ Yes

Step-by-Step Guide

How to Make an Epoxy Table Top

Prepare Surface & Mould

Sand wood to 180 grit. Seal porous wood edges with a thin coat of epoxy to prevent air bubbles. Build a dam or mould with tape and MDF. Ensure temperature is 20–35°C and humidity below 65% RH.

Weigh Accurately — 3:1 by Weight

Use a digital scale. Weigh 3 parts resin to 1 part hardener by weight. For the 1.2kg set: 900g resin + 300g hardener. Never estimate by volume — incorrect ratio causes sticky, uncured resin.

Mix Thoroughly — 3–5 Minutes

Combine in a clean dry container. Stir slowly for 3–5 minutes, scraping sides and base of container. Add pigments, inks or mica powders at this stage. Avoid whipping — introduce minimal air.

Pour & Degas

Pour slowly into the river channel or over the table surface. Use a heat gun or propane torch briefly to pop surface bubbles. Do not over-torch. Cover and do not disturb for 24 hours.

Sand & Polish to Mirror Finish

After 24 hours full cure, remove mould. Wet-sand with 400 → 800 → 1200 → 2000 grit wet-dry paper. Buff with polishing compound to achieve a glass-like mirror finish.

⚠️

Always Weigh — Never Use Volume

Mix ratio is 3:1 by weight only. Measuring by volume or guessing will result in an off-ratio mix that stays permanently sticky and cannot be fixed.

🌡️

Temperature is Critical

Pouring below 15°C will dramatically slow or prevent full cure. Ideal work temperature is 20–35°C. Do not pour in direct sunlight or rain.

💧

Keep Moisture Out

Water contamination — even humidity above 65% — causes white blush marks and surface cloudiness. Always use dry containers and tools.

🧤

Use Nitrile Gloves & Ventilation

Wear nitrile gloves and safety glasses during handling. Ensure adequate airflow in the workspace. Hardener fumes are irritants — keep sealed when not in use.

🪵

Seal Wood Before Main Pour

Porous wood releases trapped air when epoxy is applied, causing bubble streams. Always apply a thin seal coat first and let it tack before the main pour.

FAQs

Frequently Asked Questions

Which is the best epoxy resin for table top in India?

Bondone® Clear Cast is widely regarded as the best epoxy resin for table tops in India. With APHA colour <30 (water-clear), Shore D hardness 75–80, and a market-leading pot life of 300–370 minutes at 25°C, it gives you the working time, clarity and hardness needed for professional table top, river table and bar top projects. Available at Si Epoxy Adhesives from ₹710 / 1.2kg with pan-India delivery.

What is the price of epoxy resin for table top in India?

Bondone Clear Cast epoxy resin for table tops is priced at ₹710 for a 1.2kg set (900g resin + 300g hardener) and ₹6,400 for a 12kg set (9kg resin + 3kg hardener) at Si Epoxy Adhesives. B2B bulk pricing for drum quantities is available on request via WhatsApp at +91-8595955752.

How much epoxy resin do I need for a river table in India?

For a 4×2 ft river table with a 50mm wide, 25mm deep river channel, you need approximately 3–5kg of mixed epoxy. For a wider or deeper channel, calculate: Channel Volume (cm³) × 1.1 (density factor) = grams required. Si Epoxy Adhesives recommends the 12kg large set for river table projects — it covers most standard 6ft table builds with material to spare. WhatsApp us for a precise estimate for your project dimensions.

Can I pour epoxy resin table top in one shot or multiple coats?

For table top coating (2–4mm), a single pour per coat is standard. For river table channels deeper than 25–30mm, it is best to pour in multiple layers (each 25mm max) with 12 hours between pours to manage heat buildup and prevent cracking. Bondone Clear Cast's low exotherm makes it safer for thicker pours than most alternatives available in India.

Do you supply epoxy resin for table tops in bulk for B2B in India?

Yes. Si Epoxy Adhesives supplies Bondone Clear Cast in bulk for B2B customers across India — furniture manufacturers, carpenters, interior designers, contractors, handicraft exporters and fabricators. We offer bulk pricing on 12kg sets and drum quantities, with GST invoice. WhatsApp us at +91-8595955752 for B2B pricing, sample orders and account setup.

Does epoxy resin table top yellow over time in India?

Standard Bondone Clear Cast (non-UV) will very gradually yellow over years of direct UV/sunlight exposure — this is normal for standard epoxy grades. For indoor table tops away from sunlight, yellowing is minimal over normal use. If your table will receive significant direct sunlight, we recommend Bondone Clear Cast UV Stable instead, which includes UV inhibitors for much better long-term clarity. Ask us on WhatsApp for guidance on your specific application.

Where can I buy epoxy resin for table top online in India with fast delivery?

Si Epoxy Adhesives supplies Bondone Clear Cast epoxy resin for table tops online across India. Place your order via WhatsApp at +91-8595955752 or use the order form on this page. Same-day dispatch from Ghaziabad, Delhi NCR for orders placed before 3pm. Pan-India courier delivery in 1–5 business days to Mumbai, Bangalore, Hyderabad, Chennai, Pune, Ahmedabad, Kolkata, Jaipur, Surat, Lucknow, Chandigarh and all cities.

Si Epoxy Adhesives

Place Your Order

Your Details

Full Name *

Phone Number *

Email Address *

Delivery Address

Full Address *

Landmark *

City *

State *

Pincode *

GSTIN (optional — for B2B invoice)

Order Notes (optional)

We will contact you on WhatsApp/phone to confirm shipping charges and arrange payment before dispatch.

Epoxy Resin for
Table Top India

Product Specifications

Physical Properties

Mechanical Properties

Processing Data

Curing & Glass Transition Data

Pack Sizes & Applications

Key Features

Which Clear Cast is Right for You?

How to Make an Epoxy Table Top

Prepare Surface & Mould

Weigh Accurately — 3:1 by Weight

Mix Thoroughly — 3–5 Minutes

Pour & Degas

Sand & Polish to Mirror Finish

Always Weigh — Never Use Volume

Temperature is Critical

Keep Moisture Out

Use Nitrile Gloves & Ventilation

Seal Wood Before Main Pour

Pan India Delivery

Frequently Asked Questions

B2B Bulk Supply — Furniture Makers, Contractors & Designers

Your Cart

Place Your Order

Order Received!

Epoxy Resin forTable Top India

Product Specifications

Physical Properties

Mechanical Properties

Processing Data

Curing & Glass Transition Data

Pack Sizes & Applications

Key Features

Which Clear Cast is Right for You?

How to Make an Epoxy Table Top

Prepare Surface & Mould

Weigh Accurately — 3:1 by Weight

Mix Thoroughly — 3–5 Minutes

Pour & Degas

Sand & Polish to Mirror Finish

Always Weigh — Never Use Volume

Temperature is Critical

Keep Moisture Out

Use Nitrile Gloves & Ventilation

Seal Wood Before Main Pour

Pan India Delivery

Frequently Asked Questions

B2B Bulk Supply — Furniture Makers, Contractors & Designers

Related Products

Your Cart

Place Your Order

Order Received!

Epoxy Resin for
Table Top India