Bondone ClearLam CC – High-Gloss Bar Top & Countertop Epoxy Resin
ClearLam CC is the surface specialist recommended for bar tops, kitchen counters, and dining tables. A restaurant owner in Connaught Place had a bartop peeling after six months with a generic resin. ClearLam CC was applied at 1-2mm. Still glossy. Still intact. Mixed at 2:1 by weight with a 45-60 minute pot life, it cures to a 2H scratch-resistant finish and withstands heat up to 80°C. As of July 2026, the 1.5 kg kit is ₹796 and the 7.5 kg kit is ₹3,835 from the Ghaziabad warehouse. PAN India delivery.
What is the best epoxy for bar tops and countertops in India?
Bondone ClearLam CC is the best epoxy for bar tops and countertops in India because it is formulated specifically for thin surface coatings (1-2mm). Unlike deep-pour resins, ClearLam CC self-levels in thin layers without overheating, cures to a 2H scratch-resistant finish, and withstands heat up to 80°C. A 1.5 kg kit covers approximately 70 sq.ft at 1mm thickness and costs ₹796 incl GST from the Ghaziabad warehouse. For a standard home bar top of 20 sq.ft, one kit is sufficient.
How much does Bondone ClearLam CC cost in India?
Bondone ClearLam CC costs ₹796 for a 1.5 kg kit (₹531 per kg) and ₹3,835 for a 7.5 kg kit (₹511 per kg), delivered PAN India from the Ghaziabad warehouse. Both prices include GST. No COD – UPI, bank transfer, or credit card invoice accepted.
What Is Bondone ClearLam CC?
Bondone ClearLam CC is a two-component, clear epoxy laminating resin from DCM Shriram's Bondone range. It is specifically formulated for thin, high-gloss surface coatings at 1-2mm thickness – not deep pours. ClearLam CC excels where a glass-like, scratch-resistant finish is needed on bar tops, kitchen countertops, dining tables, and laminated surfaces.
ClearLam CC has been supplied to restaurants in Connaught Place, cafes in Hauz Khas, home bars in Gurgaon, and furniture restorers across Delhi NCR. The key difference from deep-cast resins is the formulation – ClearLam CC self-levels in thin films, cures with a 2H hardness that resists daily abrasion, and bonds aggressively to wood, concrete, stone, and existing laminates.
Technical Specifications
Mix Ratio
2:1100:50 by weight – resin to hardener
Pot Life
45-60 minAt 25°C – work in small batches
Application
1-2 mmThin surface coat – not for deep pours
Hardness
2H PencilFull cure – 7 days at 25°C
Heat Resistance
80°CContinuous – hot cups and plates safe
Coverage
70 sqft/kgAt 1mm thickness – 1.5kg kit covers ~70 sqft
Complete Specifications
| Property | Value |
|---|---|
| Mix ratio (resin:hardener) | 2 : 1 by weight |
| Pot life at 25°C | 45 - 60 minutes |
| Recommended coat thickness | 1 - 2 mm |
| Coverage at 1mm | ~70 sq.ft per 1.5 kg kit |
| Tack-free time | 4 - 6 hours at 25°C |
| Full cure | 7 days at 25°C (oven cure 60-70°C for 30 min) |
| Surface hardness | 2H pencil hardness |
| Heat resistance | 80°C continuous |
| Application method | Brush, roller, or squeegee |
| Shelf life | 12 months from manufacture |
Specifications from Bondone ClearLam CC product documentation. TDS and MSDS available on request.
Which Project Should You Use ClearLam CC For? – Decision Table
ClearLam CC is a thin-coat laminating resin (1-2mm), not a deep-pour casting resin. Pick your surface below.
| If you want to... | Buy this | Why | Price |
|---|---|---|---|
| Coat a bar top with a high-gloss, scratch-resistant finish | Bondone ClearLam CC | 2H pencil hardness resists micro-scratches from glasses and wiping. Withstands spilled drinks and alcohol. Self-levels at 1-2mm without overheating. | ₹796 / 1.5 kg ₹3,835 / 7.5 kg |
| Resurface a kitchen countertop with heat-resistant clear epoxy | Bondone ClearLam CC | Heat resistant to 80°C – handles hot coffee mugs and serving dishes. Crystal clear finish that does not yellow from daily use. | ₹796 / 1.5 kg |
| Give a dining table a glass-like finish without deep pours | Bondone ClearLam CC | Applies in thin coats directly over wood, bonds aggressively, and self-levels to a mirror finish without the weight or cost of deep-pour resin. | ₹796 / 1.5 kg ₹3,835 / 7.5 kg |
| Upcycle old furniture with a clear epoxy laminate layer | Bondone ClearLam CC | Applies directly over existing laminate or painted surfaces. 45-60 min pot life is long enough for precision work but fast enough to finish in an evening. | ₹796 / 1.5 kg |
Not for: Deep pours like river tables – use Bondone Clear Cast. Outdoor furniture – use Clear Cast UV Stable.
ClearLam CC vs Clear Cast – Which One Do You Need?
| Feature | ClearLam CC | Clear Cast |
|---|---|---|
| Pour depth | 1-2 mm thin coat | 5 mm to 3+ inches |
| Best for | Bar tops, countertops, table tops | River tables, deep casting, jewellery |
| Mix ratio | 2:1 | 3:1 |
| Pot life | 45-60 min | 300-370 min |
| Heat resistance | 80°C | 65°C |
| Hardness | 2H pencil | 75-80 Shore D |
| Coverage | ~70 sqft per 1.5kg at 1mm | ~1 sqft per 1.2kg at 6mm |
For deep pours, see Bondone Clear Cast. For art-focused projects, visit art resin India.
How to Use Bondone ClearLam CC – Step by Step
1. Surface preparation: Clean thoroughly – degrease and sand if glossy. The surface must be free from dust, oil, and moisture. For wood surfaces, apply a thin seal coat first.
2. Measure accurately: 2 parts Resin to 1 part Hardener by weight (100:50). Use a digital scale. Volumetric guessing leads to soft spots or sticky patches.
3. Mix gently: Stir slowly for 2-3 minutes, scraping sides. Do not whip – aggressive mixing introduces air bubbles that ruin the finish.
4. Apply: Pour onto surface and spread with a brush, roller, or squeegee at 1-2mm thickness. Self-levels in thin films – no need to overwork it.
5. Cure: Tack-free in 4-6 hours at 25°C. For commercial applications, oven cure at 60-70°C for 30 minutes for maximum hardness. Full chemical resistance develops over 7 days.
Bondone ClearLam CC Price – July 2026
Authorised distributor pricing. No middleman markups. All prices include GST.
1.5 kg Kit
₹796
₹531 per kg
Covers ~70 sqft at 1mm – perfect for home bar tops and small tables
Order 1.5 kg7.5 kg Kit
₹3,835
₹511 per kg
Covers ~350 sqft at 1mm – ideal for restaurant counters and commercial projects
Order 7.5 kgPrices valid until 31 March 2027. Includes GST. UPI, bank transfer, or credit card invoice via Razorpay link. No COD. Shipping calculated at checkout.
Delivery & Payment
Si Epoxy ships PAN India from the Ghaziabad warehouse. Typical delivery: 2-5 business days via Delhivery, Blue Dart, or surface transport for bulk. Orders before 12 PM go out same day. Shipping calculated at checkout.
Payment via UPI, bank transfer, or credit card invoice via Razorpay link. No COD. GST invoice provided with every order.
All sales are final. No returns accepted. Damaged-in-transit claims handled on a case-by-case basis with photographic evidence.
For the full epoxy range, see the epoxy resin India guide. For surface laminating projects, visit art resin India.
Frequently Asked Questions
What is the mix ratio of Bondone ClearLam CC?
The mix ratio is 2:1 (100:50 by weight). Always use a digital scale for accuracy.
What is the pot life after mixing?
Pot life is 45-60 minutes at 25°C. Work in small batches to avoid waste.
Can ClearLam CC be used for deep pours like river tables?
ClearLam CC is designed for thin surface coats (1-2mm). Deep pours require Bondone Clear Cast.
How heat resistant is ClearLam CC?
It withstands temperatures up to 80°C. Hot coffee cups and plates are fine, but avoid direct oven-hot pans.
Is it scratch resistant?
It achieves a 2H pencil hardness when fully cured, providing excellent scratch resistance for daily use.
How much area does 1.5 kg cover?
A 1.5 kg kit covers approximately 70 square feet at the recommended 1mm thickness.
Is ClearLam CC food-safe after curing?
It is inert and safe for incidental food contact once fully cured (7 days). Not recommended for direct food preparation surfaces.
How to clean and maintain a ClearLam CC surface?
Use mild soap and water. Avoid abrasive cleaners. Occasional polishing with non-abrasive wax keeps the gloss.
Need ClearLam CC for Your Project?
WhatsApp Jobin directly. He will confirm stock, share the TDS, and arrange dispatch from Ghaziabad within 24 hours.
WhatsApp +91-8595955752